Ready to use product.

• Apply TOGLIRUGGINE LIQUIDO with a brush, taking care to leave an abundant layer of product on the stain to be removed;
• Rub the surface with sponges and BLUE BUFFER;
• Leave the product to act until the reaction for the extraction of rust has occurred successfully (the product will take on a purple color);
• The time required for the reaction depends on the type of material;
• Do not let the product dry on the surface;
• Once the reaction has taken place, it is advisable to remove the product within 10-15 minutes by rinsing with a slightly alkaline aqueous solution (eg. SGRISER diluted 10% in water);
• Repeat the application if necessary.

Yield:
Depending on the absorption of the materials:

• approximately 1 lt / 6 – 10 m².

TOGLIRUGGINE LIQUIDO Specific stain remover to eliminate the formation of rust on stone materials that can be applied even on more delicate surfaces such as marble and travertine without leaving halos and residues. Removes rust stains from surfaces quickly.

What is the function of TOGLIRUGGINE LIQUIDO?

TOGLIRUGGINE LIQUIDO has the function of removing stains from external contamination, and therefore in the event that superficial stains form. If the rust comes from inside the material, however, it is difficult to remove it. For example, it may happen that the stones can be contaminated with iron, which changes the appearance of the material with humidity and water. On these stains, TOGLIRUGGINE LIQUIDO is less effective, because iron and rust are part of the stone and the product cannot remove internal contamination.

TOGLIRUGGINE LIQUIDO removes stains due to greening of lawns?

Yes, TOGLIRUGGINE LIQUIDO removes stains due to greening based on ferrous sulfate.

TOGLIRUGGINE LIQUIDO dries the lawn?

The product must not come into contact with the lawn.

Is it essential to apply SGRISER after giving TOGLIRUGGINE LIQUIDO?

No, it is not essential, but it is strongly recommended because washing with water and SGRISER removes the TOGLIRUGGINE LIQUIDO product in the micropores of the material.

In the case of very ferrous water, can TOGLIURUGGINE LIQUIDO help me to clean the surfaces?

Yes, the product removes stains due to the use of ferrous water.

After washing with POWER DET, is it recommended to do an anti-stain treatment?

Yes, it is recommended to do an anti-stain treatment and even if it fails to eliminate the problem of ferrous water, it prevents the stains from penetrating into the porosity of the material. The product we recommend to use for the anti-stain treatment is ACTIV3.

WARNINGS: ATTENTION

Hazard statements: Harmful if swallowed. – Causes serious eye irritation. – May cause an allergic skin reaction.

Precautionary statements: Avoid breathing dust / fume / gas / mist / vapors / spray. – Wear protective gloves and protect eyes/face. – If skin irritation or rash occurs: seek medical attention. – If eye irritation persists: consult a doctor. – Remove contaminated clothing and wash it before wearing it again.

Contains: Ammonium mercapto acetate; Ammonium bicarbonate; Ammonium carbamate

Ingredients compliant with Regulation (EC) No. 648/2004:
Non-ionic surfactants <1%

UFI:DP00-0018-H00H-YVG6

Rev6-Ver270122