It can be used pure or diluted in water over the entire porcelain tiles surface concerned, in order to homogeneously decontaminate it.

• Pure, for after-lying cleaning: to remove patinas, construction site dirt, and consistent and stubborn grout residues.
• POWER DET diluted 1 part of product in 1-2 equal parts of water (eg 1 liter of product and 1 liter of water): for extraordinary stain remover washes of heavily stained, haloed and deteriorated surfaces.

How to use the product:

• Spread POWER DET abundantly with cloth on the surface;
• Work 4-5 square meters at a time;
• Leave on for at least 10 minutes and do not let the product dry on the surface;
• Rub the surface with brown plastic fiber discs or buffers;
• Collect dirt residues and product with a microfibre cloth or a wet-vac;
• Finally rinse 2 or 3 times with clean water, until the product and dirt are removed from the surface;
• Repeat the application if necessary.

For the maintenance over time of surfaces cleaned with POWER DET, it is recommended to use the ordinary cleaning products GRES LINDO and GRES BRILL.

Yield:

• Depending on the dirt to be removed and the absorption of the material:
  • • as an after lying descaling cleaning: 1lt / 15-20 m²;
    • for extraordinary washing: 1lt / 30-60 m².

MAIN RELATED PRODUCTS:

• GRES LINDO Specific degreasing detergent for the ordinary cleaning of porcelain tiles surfaces;
• GRES BRILL Specific descaling detergent for the ordinary cleaning of porcelain tiles surfaces;
• ANTISPORCO Invisible protective easy to use for the dirt and stain protection of porcelain tiles surfaces. It facilitates and speeds up ordinary cleaning.

POWER DET is the ideal product for the extraordinary cleaning of porcelain tiles surfaces. When used correctly, it effectively removes the most stubborn stains from glossy, lapped and opaque porcelain tiles floors and the halos that can form after a prolonged use of non-specific products. It is recommended to apply after laying to remove dirt residues and patinas.

Why do you often recommend cleaning with POWER DET?

Because many times on the porcelain tiles there has not been made an after-lying cleaning with suitable products or unsuitable products have been applied, which have created a surface patina that tends to stain. When porcelain tiles is clean and not contaminated by patinas it must not be stained. Extraordinary cleaning with POWER DET and BLUE BUFFER brings the porcelain tiles floor back to its ideal state and makes it easy to daily maintain with GRES LINDO and GRES BRILL products. POWER DET unlike other detergents on the market for cleaning porcelain tiles, has a degreasing, descaling and removal power of resinous patinas due to the manufacturer and the laying phases.

Can POWER DET be applied if the house is furnished?

Yes, from our experience the product does not damage furniture and furnishings. However, it is always recommended to be careful when applying the product.

Can it be applied even if there are animals or children in the house?

Yes, the important thing is that they are in another room at the time of application. The product is non-toxic and does not release harmful substances before and after application. In any case, it is advisable to air the rooms.

Does POWER DET ruin the porcelain tiles?

No, it cleans the floor thoroughly and removes stubborn patinas, bringing it back to its natural state. Once applied, it is recommended to use it all over the surface, as instructed. 

WARNINGS: DANGER

Hazard statements: Causes severe skin burns and eye damage.

Precautionary statements: Do not breathe dust / fume / gas / mist / vapors / spray. – IF IN CONTACT WITH THE EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing. – IF IN CONTACT WITH SKIN (or hair): immediately take off all contaminated clothing. Rinse the skin [or take a shower]. – Wear protective gloves/clothing and protect eyes/face. – IF SWALLOWED: rinse mouth. DO NOT induce vomiting.

Contains: Alcohols; C11-13-branched; ethoxylated (> 2.5 moles EO)

Ingredients compliant with Regulation (EC) No. 648/2004:
Aliphatic hydrocarbons <1%; non-ionic surfactants 5%<C<15%; anionic surfactants <5%

UFI:VEC0-809V-T00D-NJA8

Rev8-Ver18042024