Product ready to use.

• Mix the product well until a fluid paste forms;
• Apply the product with a spatula taking care to leave a layer of at least 3-5 mm of SOLVOSILL on the entire stained surface;
• Cover the entire stained element (e.g. tile, step, slab, etc.). If necessary, the duration of the extractive action can be increased by covering the compress with an extensible plastic sheet (e.g. PE film for food);
• Always allow the pack to dry 12-24 hours and then proceed to its dry removal with nylon brush or broom brush;
• Finally, rinse with acid solution of DELICACID diluted 1:10 in water or with neutral solution of UNIPUL diluted 1:3 in water on delicate materials (e.g. marble, polished grit);
• On stones and compact materials, it is possible that the result of stain removal is visible after several days, since the solvents contained in the product are slowly evaporating;
• You may need to reapply the product several times.

If used outdoors, it is advisable to avoid spreading the product on too hot and exposed to the sun surfaces.

On treated surfaces, the application of SOLVOSILL, being a strong solvent stain remover, removes any treatments ( wax or resin). It is advisable to apply the product not only on the defined stain, but on all the affected tile or step so as to have a uniform surface and without halos.

Yield:
• on average with 1kg of product about 1-2mq of surface are covered.

SOLVOSILL is the thickened strong stone stain remover, specific for the removal of synthetic stains and not from stone materials and raw wood. Thanks to its deep action, it is able to remove stains present for a long time without damaging the absorbent material.

Can SOLVOSILL be used in the hottest hours of the day?

In summer it is advisable to apply SOLVOSILL in the evening for the morning because of the high daily temperatures that make the product dry too quickly without removing any stains.

How long does the product remain usable once opened?

Not much: it is closed well and the duration is still a few weeks.

What is the recommended operating temperature? 

The recommended application temperature for the SOLVOSILL product is between 5 and 30 degrees.

Is it effective for removing silicone grease stains?

Yes, it is necessary to remove the excess silicone before applying the product. If necessary, it can be reapplied. In warm seasons it is advisable to do it in the evening, letting it dry all night, so as not to risk it evaporating too quickly.

WARNING: DANGER

Hazard statements: Flammable liquid and vapour. – May be fatal if swallowed and enters airways. – Causes serious eye irritation. – Causes skin irritation. – May cause an allergic skin reaction. – May cause drowsiness or dizziness. – Very toxic to aquatic life with long lasting effects.

Precautionary statements: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. – Do NOT induce vomiting. – Wear protective gloves/ protective clothing / eye protection / face protection. – Avoid release to the environment. – Call a POISON CENTRE / doctor / . . . if you feel unwell.

Contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics, (R)-P-MENTHA-1,8-DIENE 1-METHOXY-2-PROPANOL

UFI:G410-H0G8-2000-8KDH

Rev3-Ver310122