ALGANET
€23.70VAT Included
ALGANET
€23.70VAT Included
- Specific stain remover
Stain remover for stone materials
Concentrated stain remover in powder specifically for the deep cleaning of external stone floors. It cleans and helps to remove algae, moss, and other encrustations of organic origin from surfaces.
Description
Characteristics and use:
ALGANET is a specific powder stain remover for the deep cleaning of external surfaces in stone material (eg porcelain tiles, ceramic, cotto, marble, stone, terrazzo).
ALGANET:
- helps, through its action and the mechanical rubbing action of the surface, to remove the blackening left by microorganisms (eg residues of algae, moss, and lichens), residues of leaves and flowers, animal excrement, urine, etc .;
- can also be applied to treated surfaces;
- has a deep and more effective action over time;
- can also be used for cleaning tents and tarpaulins in pvc and other external plastic materials;
- is effective even at low temperatures;
- once dry, is no longer dangerous for the vegetation;
- can be applied several times on very dirty surfaces and in the presence of lichens that are difficult to remove, without damaging the stone materials.
Pay attention that when applying ALGANET in its liquid state it does not come into direct contact with soil, plants, fabrics, metals, and wood.
Do not use other acid products when applying ALGANET.
How to use
Extraordinary cleaning on surfaces contaminated by biological incrustations:
- Dissolve in a clean plastic bucket 800 gr of ALGANET in 10 liters of water mixing for a few minutes. The solution thus obtained must be used within 3 – 4 hours;
- Can be applied by brush, sponge, soft cloth or broom;
- Thoroughly wet the surface to be treated by rubbing the product with hard brush or brown buffer and leave it act until drying (normally 12/24 hours);
- Repeat washing if necessary;
- Finally, rinse with plenty of water or pressure washer.
Extraordinary cleaning on surfaces heavily contaminated by biological incrustations (especially lichens):
- It is advisable to carry out a preliminary washing with a pressure washer or rub the surface with water and BROWN BUFFER, so as to remove as much as possible the surface patina;
- Dissolve in a clean plastic bucket 800 gr of ALGANET in 10 liters of water mixing for a few minutes. The solution thus obtained must be used within 3 – 4 hours;
- Can be applied by brush, sponge, soft cloth or broom;
- Thoroughly wet the surface to be treated by rubbing the product with hard brush or brown buffer and leave until drying (normally 12/24 hours);
- Subsequently, the surface must be rinsed with a water solution and ECOMARBEC (diluted to 20/30%), so as to degrease and remove in depth the residues of dirt and product ALGANET;
- During the rinsing phase it is recommended to rub the surface with hard brushes, discs, brown buffers in order to facilitate the removal of degraded dirt;
- Repeat washing if necessary;
- Finally, rinse with plenty of water or pressure washer.
Yield:
- with 800gr of powder, about 10 liters of cleaning solution are prepared (average consumption of the diluted product 1 lt / 5-7 m2).
MAIN RELATED PRODUCTS:
- IDROWIP Water-repellent protective for absorbent materials;
- SILOX6 Water-repellent protective for compact stone materials.
Video
Faq
ALGANET is the ideal product for cleaning outdoor floors made of stone material such as porcelain stoneware, ceramics, terracotta, marble, stone, cement agglomerates. It thoroughly cleans even very dirty outdoor surfaces without altering the appearance of the floor.
When should ALGANET be used?
ALGANET is ideal for cleaning and removing mould and biological incrustations, as well as for decontaminating outdoor surfaces. This product is particularly effective in treating mats of algae, lichen and mould that accumulate over time. By using it, surfaces will become clean again while maintaining their appearance and functionality over time.
Should the surface be scrubbed after applying ALGANET?
When there is not so much encrustation, washing with a high-pressure cleaner or pressurised water is sufficient, but on more tenacious encrustations it is recommended to rub the surface vigorously with brown discs or buffer pads and then with an aqueous solution of ECOMARBEC. In fact, it is only by rubbing that one can penetrate deep into the porosity of the material and uproot the lichen roots, which are very difficult to remove otherwise.
How can biological fouling be prevented?
To prevent or slow down the formation of biological incrustations, we recommend treating terracotta or concrete surfaces with IDROWIP or TIM water-repellent protection, and stone surfaces with SILOX 6 or ACTIV3 water-repellent protection.
Is it possible to reapply ALGANET periodically?
Yes, it is advisable. ALGANET decontaminates the surface and prevents the formation of mould and biological incrustations. It is recommended to apply it once a year in spring, leave it to work and wash it off with rainwater to avoid tiring pad washing. Algae in humid environments always reform despite the surface being treated: ALGANET does not spoil such treatments.
Is ALGANET harmful to plants?
ALGANET during the liquid phase may yellow the grass. It is therefore recommended to avoid contact with plant organisms. Simply apply it on the walls with a brush. Once the product is dry, it can be rinsed off onto the ground or into the sewage system as it has lost its harmfulness to plants.
How much can I save by opting for larger packages?
Price transparency is at the core of our philosophy. We always offer our customers a clear and cost-effective shopping experience. Discover how you can maximize your savings by choosing our larger packages.
Warnings
WARNINGS: DANGER
Hazard statements: Harmful if swallowed.- Causes severe skin burns and eye damage.- May cause respiratory irritation.- Very toxic to aquatic life with long-lasting effects.- Contact with acids liberates toxic gas.
Precautionary statements: Do not breathe dust / fume / gas / mist / vapours / spray. – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. – Wear protective gloves/ protective clothing / eye protection / face protection. – Immediately call a POISON CENTER / doctor / . . . – Wash . . . thoroughly after handling. – Avoid release to the environment.- IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Contains: Sodium metasilicate pentahydrate, Sodium dichloroisocyanurate dihydrate, Sulfuric acid, mono-C12-14-alkyl esters, sodium salts.
Ingredients compliant with Regulation (EC) No. 648/2004:
Chlorine-based whiteners> 30%, Phosphates 5 – 15%, Anionic surfactants <5%.
UFI: 3W40-S0UQ-H00S-CM1C
Rev7-Ver260122
Cleaning and treatment systems
The product is in the following cleaning, maintenance and treatment systems
Customers who viewed this product also viewed
29.28€
OLIO RAVVIVANTE
Impregnator specific for the recovery of floors, walls, fixtures and wooden furniture inside and outside painted deteriorated and grayed. It renews the color and the initial finish, re-guarding the wood.