14.32VAT Included

14.32VAT Included


14.32VAT Included

14.32VAT Included
  • Protective agent against moisture and/ or antistain

Protective against rising damp for stone materials

Water-repellent protective for cotto, absorbent stone, plasters, cement, and internal and external terrazzo. It significantly increases the thermal insulation of the walls, reducing thermal dispersion, while leaving the appearance of the material unchanged.

Invite your friends and get new discounts
Sign up for our newsletter to get 10% discount


Characteristics and use:

IDROWIP is a breathable water-repellent protective for absorbent stone materials: cotto, absorbent natural stone, cement, mineral plaster.


  • is an odorless water-based product, without danger to the user and the environment;
  • forms a consistent breathable water-repellent chemical barrier;
  • avoids and contrasts the rising of humidity (and consequently the formation of saline efflorescence, crusts, patinas, algae, etc.);
  • drastically reduces the absorption of water in the material (eg rain, water-soluble substances, etc.);
  • significantly increases the thermal insulation of the walls by reducing heat loss;
  • has a high chemical inertness and resistance to atmospheric agents;
  • does not alter the appearance of the material;
  • on highly absorbent materials we recommend applying the product in the stages preceding the laying or grouting of the material, in order to protect the surface and facilitate and speed up the subsequent cleaning steps of excess slurry.

In cases of very humid structures and substrates and with the presence of permanent rising damp, the product is not suitable for structural restoration (it does not prevent the formation of saline efflorescence and degradation). Therefore, in such situations, a basic structural renovation is recommended (eg damp barriers and other rehabilitation systems).

How to use

  • Shake before the use;
  • It can be applied by spray or with a soft cloth, sponge or fleece wax spreader, evenly wetting the surface to be treated, following the absorption of the material;
  • After about 20/30 minutes, redistribute any excess on the material with a soft cloth during the drying phase;
  • Normally it dries in 4-8 hours depending on the ventilation;
  • The second coat must be applied as soon as the first has been absorbed and without waiting for it to dry (wet on wet).

It is to apply when the material is saturated:

  • 1 coat: on materials with medium absorption;
  • 2 coats: on highly absorbent materials.

Avoid that the surfaces just treated are wet from the rain before 12 hours.

Depending on the absorption of the materials:

  • on low absorbent material 1 lt / 8 – 15 m²;
  • on very absorbent material 1 lt / 4 – 8 m².


  • EXCEL PLUS Stain protection for absorbent stone materials;
  • IDROFIN MATT or LUCIDO Anti-wear anti-dirt finisher for absorbent stone materials installed inside;
  • PAV05 Anti-wear anti-dirt and anti-vegetative finisher for absorbent stone materials installed outside.



IDROWIP is a professional product ideal for protecting surfaces and materials in terracotta, cement, plaster and natural stone absorbent. Ideal to limit and counteract the rise of moisture, IDROWIP helps to significantly reduce the absorption of water in the treated material by creating a breathable water repellent barrier.

Can I apply IDROWIP on the walls?

If you want to reduce the wettability of absorbent stone materials (plasters, cotto, concrete, stones) from rainwater, the IDROWIP product is indicated. If, on the other hand, you want to eliminate the rising damp coming from inside the structure (heavily deteriorated walls), the product is not suitable and it is advisable to carry out a surface restoration treatment.

Does IDROWIP change the tone of the material?

No, IDROWIP is transparent and breathable. Leave the material in its raw state.

Does it stop the forming mold?

IDROWIP blocks or slows down the formation of algae and mold as, in this way, water stagnates less in the material. The product prevents the formation of dark spots due to rising damp over time and also preserves the initial characteristics of the material.
It is always recommended to apply a water repellent on absorbent stone materials (especially outdoors, but also indoors in humid environments) to avoid the formation, over time, of dark spots due to persistent humidity. The latter dissolves the salts contained both on the cotto and on the screed which crystallize, creating dark spots that are difficult to remove.

How long does the treatment with IDROWIP last?

Outdoors, as a rule, it lasts about 10 years and can be reapplied. Inside it is final.

Is IDROWIP ready to use or diluted?

The product can be diluted in water in a maximum ratio of 80% of product and 20% of water, but it is advisable to use it pure. 

Is it possible to paint after applying the product on external plaster?

No, that’s not possible. IDROWIP can be applied over a mineral paint, such as silicate paints or lime paints, in order to protect and confer greater water repellency.

Have you ever heard of IDROWIP, the breathable hydrophobic protector for absorbent stone materials like terracotta, natural stone, and cement?

Are you searching for an innovative product to safeguard your absorbent stone materials such as terracotta, natural stone, and cement? Have you come across IDROWIP? IDROWIP is a breathable hydrophobic protector specially formulated to ensure long-lasting protection for your stone materials. Thanks to its advanced formula, this product creates an invisible barrier that repels water and penetrating liquids without compromising the materials’ breathability. Whether you have terracotta outdoor flooring or natural stone walls inside your home, IDROWIP is the ideal solution to preserve the aesthetic appearance and longevity of your materials. This hydrophobic protector works deep within the structure of absorbent materials, preventing damage caused by moisture such as water stains or efflorescence. Applying IDROWIP is simple and swift. Just spray the product on the surface to be treated and allow it to dry naturally. Once applied correctly, you can enjoy the benefits of long-lasting moisture protection without altering the original look of your materials. Don’t let moisture ruin your precious stone materials. Choose IDROWIP, the breathable hydrophobic protector that provides an effective and enduring solution for safeguarding materials like terracotta, natural stone, and cement.

If you’re seeking an effective way to shield your surfaces from moisture and related issues like salt efflorescence, crusts, patinas, or algae, IDROWIP is the perfect solution.

IDROWIP is an innovative product offering dependable, long-lasting protection for your surfaces. Thanks to its advanced formula, it creates a protective barrier that prevents moisture absorption and thwarts the formation of unsightly salt efflorescence. Moreover, IDROWIP is highly effective in countering algae proliferation on various surfaces. With its antimicrobial and anti-algae properties, it enables you to maintain clean and resilient surfaces over time. Whether you need to protect external or internal walls, floors, or any other surface exposed to moisture and its detrimental effects, IDROWIP is the right choice. Its easy application makes the process straightforward and efficient. Don’t let moisture and its related problems mar your surfaces. Opt for IDROWIP for reliable, enduring protection.

Thanks to its innovative formulation, it creates a substantial chemical barrier that repels water while still allowing the surface to breathe.

The innovative formulation of this product establishes a durable chemical barrier that repels water, yet simultaneously allows the surface to breathe. Thanks to this chemical barrier, water is effectively rebuffed, preventing it from permeating the treated surface. This means that the material remains dry even in the presence of rain or humidity. In conclusion, through its innovative formulation, this product constructs a robust chemical barrier that repels water while enabling the surface to breathe.

Not only does it prevent rising dampness, but it also significantly reduces water absorption.

Our solution not only effectively prevents rising dampness but also dramatically reduces water absorption. We understand the significance of maintaining dry environments and protecting against the detrimental effects of moisture. With our innovative product, we offer a comprehensive solution to combat moisture-related problems effectively and enduringly. Our advanced technology acts as a protective barrier, preventing water from penetrating treated surfaces. Through this unique feature, we guarantee exceptional results in preventing moisture-induced damage and in upholding healthy and safe environments. Don’t let moisture become a problem—choose our reliable and efficient solution to protect your structures and enhance your daily quality of life.


The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements).


Free shipping from 100€ - Delivery in 5-6 working days
Secure payment
Whatsapp Contact: +39 334 8578502