• Distribute OX FIVE on the surface with a brush or spreader fleece, evenly, following the absorption of the wood;
• The ageing action is progressive until the material is dry;
• The effect depends on the application cycles carried out (max. 2 coats);
• The 2nd coat is applied as soon as the surface is dry (2 – 4 hours);
• Eliminate the defibration of the wood that forms after the application of OX FIVE, using a not too fine grit paper or abrasive net (e.g. 100).

The intensity and final result of ageing depends on the type of wood species and may vary, for the same wood, from element to element (planks, boards, beams, etc.). It is therefore advisable to take sufficiently representative samples of the finished product.

Yield:

• depending on wood absorption capacity 1 litre / 8-12 m2.

MAIN RELATED PRODUCTS:

• TIROIL Oil-wax impregnating agent for interior wooden floors, walls, doors and furniture;
• BIOTOP or BIOTOP OPACO Specific finishing and protective wax for oiled wood.

How much can I save by opting for larger packages?

Price transparency is at the core of our philosophy. We always offer our customers a clear and cost-effective shopping experience. Discover how you can maximize your savings by choosing our larger packages.

Can OX FIVE be applied on woods other than oak and chestnut?

No, it must be applied on the woods indicated on the label: on other woods it does not produce the desired effect.

WARNINGS: DANGER

Indications of danger: Causes serious eye damage.

Precautionary statements: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. – Protect eyes/face. – Immediately call a POISON CENTRE / doctor / . . .

Contains: ammonium carbamate.

UFI: 8P20-M0WD-J00W-5QVP

Rev5-Ver140222