• Spread SOLVALL on the surface and let it work 15 – 30 minutes up to a maximum of 8-12 hours in the most extreme situations;
• Then wipe the wet surface of SOLVALL with buffers, black discs or with tynex brushes;
• Emulsify with water and remove the residue;
• For the strongest removal of resinous-oily treatments, it is recommended to perform a strong cleaning with the SGRISER product after the washing with SOLVALL;
• On acid-resistant materials, such as terracotta, granite or unpolished stones, it is recommended to make the first rinse with DELICACID for a deeper cleaning of the porosity of the material;
• Finally, complete the rinse cycle with water;
• Repeat the application if necessary.

Do NOT apply SOLVALL on wood, synthetic agglomerate and painted metal surfaces.

Yield:

• 1lt / 4-15 m², depending on the level of dirt present and the absorption of the material.

MAIN RELATED PRODUCTS: 

• SGRISER Strong cleaning agent for stone materials;
• DELICACID Gentle descaling remover for acid-resistant stone materials.

How much can I save by opting for larger packages?

Price transparency is at the core of our philosophy. We always offer our customers a clear and cost-effective shopping experience. Discover how you can maximize your savings by choosing our larger packages.

What types of stone materials can SOLVALL clean?

SOLVALL is a highly effective product for cleaning a wide range of stone materials. Thanks to its powerful formula, it can be used to clean terracotta, stone, clinker, cement, terrazzo, and other similar surfaces that have been treated with resin-based finishes.

Its film-stripping action breaks the bonds of resin finishes and penetrates deeply into the pores of stone materials, removing resin films and stone paints.

How does SOLVALL compare to conventional paint strippers?

With SOLVALL, your paint stripping process will never be the same. Compared to conventional paint strippers, SOLVALL offers an advanced and innovative solution that allows you to achieve superior results more efficiently.

Compared to conventional paint strippers, SOLVALL has a slower evaporation rate, longer application time, and deeper film-stripping action. SOLVALL effectively removes paints and coatings without damaging the underlying surfaces.

Additionally, the use of SOLVALL is also safer for the environment and operators, minimizing the emission of harmful substances and the risks associated with handling chemical solvents.

What substances can SOLVALL remove from stone materials?

It removes resin-based waxes, paints, and other surface treatments.

It is used when the old treatment has been done with resin polymer films and consequently the action of decerating becomes difficult to achieve. SOLVALL is able to break these types of surface films, making the decerating action easier. So, SOLVALL is applied first to break the polymer bonds of the film surfaces, and then the decerating product can be applied.

WARNING: DANGER

Hazard statements: Flammable liquid and vapour. – May be fatal if swallowed and enters airways. – Causes serious eye irritation. – May cause drowsiness or dizziness.

Precautionary statements: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. – Do NOT induce vomiting. – Wear protective gloves/ protective clothing / eye protection / face protection. – Avoid breathing dust / fume / gas / mist / vapours / spray. – Call a POISON CENTRE / doctor / . . . if you feel unwell. – Store in a well-ventilated place. Keep container tightly closed.

 Contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclic, <2% aromatic, 1-methoxy-2-propanol

UFI: 0A20-M04T-A00X-HCJE

Rev8-Ver28112023