KIT RECUPERA MARMO

€93.64VAT Included

KIT RECUPERA MARMO

€93.64VAT Included

For:

Professional accessories MARBEC

Complete kit for the recovery and removal of micrographs from marbles and stones

This DIY- Kit is ideal for the recovery and re-polishing of marble and polished terrazzo (grits, palladian, etc.), which have been heavily damaged by acidic substances (corrosions), dulled by the use or accumulation of limestone or with scratches.

Invite your friends and get new discounts

Description

KIT RECUPERA MARMO is ideal for the re-polishing of marble and polished terrazzo (grits, palladian, etc.).

KIT RECUPERA MARMO:

is indicated for the re-polishing and removal of stains due to wear, limestone crusts or acidic substances and scratches on stairs, walls and bathroom tops strongly damaged.
Use with a drill or screwdriver.
With the Kit Recupera Marmo 75MM you can do up to about 3/4 m².
With the Kit Recupera Marmo 125MM you can do up to about 8/10 m².
Always use water as lubricant together with MARBEC DIAM DISC, MARBEC DIAM PAD and KW-STAR.
When not using an adjustable speed drill, adjust the pressure accordingly.
Use clean water at every step.
Repeat the process if necessary.
It is necessary to apply pressure on each step when working on marble or terrazzo.
Do not use on granite, quartz or resin tops.

Packaging:

The KIT RECUPERA MARMO contains:

1 MARBEC 75MM BACKING PAD;
1 RED DIAM DISC 75MM MARBEC diamond paper for the first phase of roughing of marble, stones and terrazzo;
1 ORANGE DIAM DISC 75 MM MARBEC diamond paper for the second phase of polishing of marble, stones and terrazzo;
1 YELLOW DIAM DISC 75MM MARBECdiamond paper for the third phase of pre-sanding of marble, stones and terrazzo;
1 BLUE DIAM DISC 75MM MARBEC diamond pad for the fourth polishing phase of marble, stones and terrazzo;
1 GREEN DIAM PAD MARBEC diamond pad for the third sanding and crystallization of marble, stones and terrazzo;
200 GR KW STAR – crystallizing powder polish for marble and stones;
200 GR MARMOLUX – protective and shine cream for marbles and stones;
1 microfiber cloth.

KIT RECUPERA MARMO 125MM contains:

1 MARBEC PAD 125MM;
1 RED DIAM DISC 125mm MARBEC diamond paper for the first phase of roughing of marble, stones and agglomerate;
1 ORANGE DIAM DISC 125 MM MARBEC diamond paper for the second phase of polishing of marble, stones and agglomerate;
1 YELLOW DIAM DISC 125MM MARBEC diamond paper for the third phase of pre-sanding of marble, stones and agglomerate;
1 BLUE DIAM DISC 1255MM MARBEC diamond pad for the fourth polishing phase of marble, stones and agglomerate;
1 GREEN DIAM PAD MARBEC diamond pad for the third sanding and crystallization of marble, stones and agglomerate;
200 GR KW STAR – crystallizing powder polish for marble and stones;
200 GR MARMOLUX – protective and shine cream for marbles and stones;
1 microfiber cloth.

How to use

1° Passage, RED DIAM DISC MARBEC:
– Roughing –
This is the most important step of all. If the first step is not performed well the following steps will not have an optimal result.

The surface should be cleaned before starting (remove any previous film-forming treatments such as waxes or resins).
Add water and slowly drill the RED DIAM DISC MARBEC.
It is necessary to apply the product with the drill making small uniform circular movements on the affected surface until the water does not change color and a mush forms.
Then remove the dirty water.
You will need to repeat sanding depending on the state of the surface.

2° Passage, ORANGE DIAM DISC MARBEC:
– Sanding –
With this second step we will continue to smooth the surface more and more finely. Repeat the steps of the first application using the ORANGE DIAM DISC MARBEC.

3° Passage, YELLOW DIAM DISC MARBEC:
– Pre-polishing (2 TIMES) –

With this third step we will already get some shine. Add water and repeat the first application using the YELLOW DIAMOND DISC MARBEC. Clean the surface and let it dry. Repeat the process again and remove the dirty water.

4° Passage,BLUE DIAM DISC MARBEC:
– Polishing (2 times) –

Proceed to repeat step n. 3 using the BLUE DIAM DISC MARBEC. With this step we will get the shining. The color of the water will no longer be so cloudy.

5° Passage, GREEN DIAM DISC MARBEC:
– Final polishing –

Repeat step n.4 using the GREEN DIAMOND DISC MARBEC. The surface is polished.

6° Passage, GREEN PAD DIAM MARBEC + KW-STAR:
– Crystallization –

With this fourth step we will crystallize and polish the surface.

Add small amounts of crystallizing powder of KW-STAR and slightly wet with water to form a paste, then slowly pass the GREEN DIAM PAD MARBEC with the drill.
It is necessary to apply the product with the drill making small uniform circular movements on the affected surface until the water does not change color and a mush forms. Then remove the dirty water.
You will need to repeat polishing depending on the state of the surface.

7° Passage, MICROFIBER CLOTH + MARMOLUX :
– Protective action and maintenance –

Add small amounts of MARMOLUX and use the MICROFIBER CLOTH to polish the surface.
It is advisable to apply MARMOLUX for routine maintenance once every 6 months or as required.