Restoration of matt painted interior wood

Maintenance system for internally painted wooden floors and parquet with an opaque finish, allows you to clean without attacking the finish and the wooden essence and maintain the aesthetic and protective characteristics of the initial treatment over time.

Where and when

Where:

On all opaque painted wooden internal surfaces.

When:

If the wood is worn and dull because of time and foot traffic.

Frequency of use:

One-off, when the floor needs a treatment that restores tone and protection from trampling and time.

Performance and consumption

PULIBRILL:

can be used for the ordinary and extraordinary non-aggressive cleaning of all wooden surfaces, painted or treated with oil and/or wax;
cleans and sanitizes the wooden surface;
does not attack the wood essence and the finish of the material;
maintains the brilliance of the initial treatment over time.

LINGOLIFE OPACO:

can be applied on all matt painted wood surfaces (parquet, wall tiles, furniture, windows and doors), PVC and Linoleum floors. For internal use;
is an anti-dirt finisher with excellent protective capacity and resistance to traffic;
gives the material a matt finish, resistant to water and detergents;
prolongs the life of painted parquet;
makes the micrographs disappear from the surface;
prevents the release of parquet;
applies quickly and quickly.

Start

Torna all'intro

Step 1 di 2

Deep cleaning of wood

• Dilute 100-200 cc of PULIBRILL in 1lt of water: to carry out an extraordinary cleaning of substantial dirt removal.
• spread the product on the surface with a rag and leave on for a few minutes;
• wipe the surface with white swab;
• finally, rinse everything with clean water.
Applies as a normal detergent with microfiber cloth. In this dilution you can also use scrubbing machines.

Go to step 2

Prodotti e accessori

PULIBRILL

Detergent for wood and parquet specific for ordinary and extraordinary non-aggressive cleaning on materials and treatments. It maintains the brilliance of the initial treatment over time.

SOFT MICROFIBER CLOTH | MARBEC

Ideal for washable tops such as glass, mirrors, plastic, stainless steel, chrome, ceramic and enamel surfaces. Particularly strong, tear-resistant edge. Can be used for all environments. Measures 40x40 cm.

Torna all'intro

Step 2 di 2

Application of maintenance wax

• The product is used pure
• Shake before use;
• Apply on clean and dry surfaces;
• Spread 1-2 coats of MATTE LIGNOLIFE. The product is distributed with spreading fleece, microfiber or terry cloth. It should be spread in a thin layer, wetting the surface evenly and without leaving excess product;
• apply the second coat as soon as the first one is dry;
• dries quickly, generally in 2 - 3 hours in well-ventilated environments.
Yield: 1 lt/ 30-40 sqm (for single passage).

Go to step 3

Prodotti e accessori

LIGNOLIFE OPACO

Finisher for the renovation of opaque varnished parquet. It gives the surface a new tone, an opaque finish and resistance to washing and trampling.

FLEXIBLE WAX APPLICATOR FLEECE | FILMOP

Perfect for distributing wax, even on hard-to-reach surfaces, as it can be attached to the telescopic handle.

ADVICE FROM THE TECHNICIAN

Based on your problem, double-check the steps recommended by the technician and select the right products for you! For any need, do not hesitate to contact our technicians by email or by sending a message on whatsapp.

9.04€

PULIBRILL

Detergent for wood and parquet specific for ordinary and extraordinary non-aggressive cleaning on materials and treatments. It maintains the brilliance of the initial treatment over time.

Buy