Removing smog from terracotta facades

The cleaning system for the removal of smog on terracotta façades has a high dissolving power of smog deposits, green algae and mold from all vertical surfaces.

Where and when

Where:

  • On all types of terracotta and earthenware cladding placed outdoors.

When:

  • For cleaning and removing smog deposits, green algae and mould from vertical surfaces such as facades, walls, doorways, window sills, etc.
Frequency of use:

For a one-off deep cleaning of outdoor terracotta surfaces.

Performance and consumption

PULITORE FC:

  • degreases surfaces by removing smog crusts, pollution, greasy substances and biological incrustations (algae, mould, etc.);
  • is a gel product that is easy to apply, designed for vertical surfaces;
  • easy to use, odourless;
  • contains no solvents.

DELICACID:

  • is a controlled-action acid detergent with minimal environmental and toxicological impact for descaling and pickling even the most delicate materials;
  • can be used for descaling washes after laying, for removing cement encrustations and consistent and tenacious lime deposits;
  • can be used for ordinary descaling washes of surfaces subject to limescale deposits;
  • can be used for manual and mechanical washing (e.g. scrubber driers, pressure washers);
  • is effective in removing surface rust deposits;
  • does not contain hydrochloric acid;
  • does not fumigate or develop toxic vapours.
Torna all'intro
Step 1 di 2

Biological encrustations removal

• It is used pure.
• Apply PULITORE FC with synthetic fiber brush on the surface and let it act for at least 20-40 minutes.
• Rub the surface with BROWN BUFFER PAD or PBT BRUSH.
• Finally rinse with pressure washer or with plenty of water until the product is completely removed.

Yield: average 1 lt / 4-8 sqm.

Prodotti e accessori

PULITORE FC

Concentrated gel cleaner for cleaning facades and vertical surfaces from air pollution, carbon black and biological encrustations. Restores surfaces to a clean and unpolluted appearance.

BROWN BUFFER PAD MARBEC | Very Abrasive

Sponge with strong abrasive properties, for strong descaling and de-waxing of stone materials.

Torna all'intro
Step 2 di 2

Neutralizing wash

Dilute one part of DELICACID in 1 or 2 parts water.
• Spread the product on the surface and let it act for a few minutes.
• Rub the surface with plastic fiber pads or discs or nylon or tynex brushes.
• Repeat washing if necessary.
• Always rinse with plenty of water.

Yield: 1 lt /4-6 sqm.

Prodotti e accessori

DELICACID

Specific buffered acid detergent to remove cement grouts, efflorescence and limestone incrustations on stones, ceramic materials and stone materials in general.

BROWN BUFFER PAD MARBEC | Very Abrasive

Sponge with strong abrasive properties, for strong descaling and de-waxing of stone materials.

ADVICE FROM THE TECHNICIAN

Depending on your problem, check again the steps recommended by the technician and select the right products for you! For all your needs, do not hesitate to contact us, either by e-mail or on WhatsApp.

51.84€

PULITORE FC

Concentrated gel cleaner for cleaning facades and vertical surfaces from air pollution, carbon black and biological encrustations. Restores surfaces to a clean and unpolluted appearance.

4.36€

BROWN BUFFER PAD MARBEC | Very Abrasive

Sponge with strong abrasive properties, for strong descaling and de-waxing of stone materials.

7.84€

DELICACID

Specific buffered acid detergent to remove cement grouts, efflorescence and limestone incrustations on stones, ceramic materials and stone materials in general.

Free shipping from 100€ - Delivery in 5-6 working days
Secure payment
Whatsapp Contact: +39 334 8578502