Anti-infiltration treatment
The anti-infiltration treatment for floors and walls represents a significant innovation in the protection of porcelain stoneware or ceramic surfaces. This intervention creates an invisible chemical barrier, applicable both on the tiles and on the joints, drastically reducing the water absorption capacity. This feature not only repairs existing damage, but also prevents future problems from arising, avoiding costly dismantling costs. In addition, its effectiveness is long-lasting, providing protection that can be reapplied as needed, thus offering a sustainable and long-term option for surface maintenance.
Where and when
Where and when
Where:
On porcelain stoneware and ceramic floor and wall tiles and ceramic materials. Ideal for waterproofing joints.
When:
It is particularly suitable for dealing with water infiltration on surfaces such as terraces, balconies, floors and shower coverings, especially when these infiltrations are due to surface cracks and cracks with a maximum width of 1.5 mm.
Frequency of use:
Frequency of use:
- One-off, the treatment;
- Protection with ACQUABLOCK lasts about 10 years, except for structural movements of the treated surface;
- It can be reapplied as needed.
Performance and consumption
ACQUABLOCK:
- it repairs and avoids costly dismantling costs and, if applied correctly, has a lifespan of years;
- it has the possibility of being reapplied;
- it forms an invisible chemical barrier that drastically reduces the absorption capacity of water;
- prevents the formation of efflorescence and algae;
- consolidates joints and restores the original cohesion of the materials;
- It does not create films on the surface and does not alter the appearance of the material. It does not yellow;
- it has excellent resistance to aging, trampling and atmospheric agents.
N.B. ACQUABLOCK dries in 6-8 hours. Protect or prevent freshly treated surfaces from being wet from rain before 24 hours of application.
Yield: 1lt/ 15 – 20 mq.
STEP 1
• ACQUABLOCK is used pure on dry, clean and untreated material;
• it is applied by brush, soft cloth or spreading fleece, evenly wetting the surface to be treated until saturated, following its absorption;
• insist on joints and cracks;
• After 5-10 minutes, remove the unabsorbed product completely from the material by wiping the surface with a soft dry cloth or paper towel.
Prodotti e accessori
ACQUABLOCK
Protective anti-infiltration for floors and walls in stone material. It drastically reduces the water absorption capacity, eliminates infiltrations, and aggregates the materials. It does not alter the appearance of the surfaces.
FLEXIBLE WAX APPLICATOR FLEECE | FILMOP
Perfect for distributing wax, even on hard-to-reach surfaces, as it can be attached to the telescopic handle.
PROFESSIONAL FLOOR CLEANING HANDLE | FILMOP
Lightweight, stainless anodised aluminium handle, designed to reduce fatigue in professional and home use.
THE COACH'S ADVICE
Based on your problem, double-check the steps recommended by the technician and select the right products for you!
35.16€
ACQUABLOCK
Protective anti-infiltration for floors and walls in stone material. It drastically reduces the water absorption capacity, eliminates infiltrations, and aggregates the materials. It does not alter the appearance of the surfaces.
20.07€
FLEXIBLE WAX APPLICATOR FLEECE | FILMOP
Perfect for distributing wax, even on hard-to-reach surfaces, as it can be attached to the telescopic handle.
11.05€
PROFESSIONAL FLOOR CLEANING HANDLE | FILMOP
Lightweight, stainless anodised aluminium handle, designed to reduce fatigue in professional and home use.
