Post-installation and/or post-site descaling cleaning

Where and when

Where:

• In the case of natural, acid-resistant stone floor and wall coverings, apply DELICACID.
• In the case of polished, non-acid-resistant stone (e.g. polished limestone, slate, polished marble) apply SGRISER.

When:

• For cleaning and removing from surfaces of:
  • • Efflorescence and lime deposits;
    • Cement residues from laying;
    • Lime paint residues;
    • Plastering residues;
    • Lime patina from irrigation water.

Frequency of use:

• For one-off cleaning after the laying process.
• For the descaling cleaning of outdoor areas where there is very limy irrigation water.

Performance and consumption

DELICACID:

• is a mild acid detergent with controlled action, ideal for cleaning even the most delicate stone materials (natural stone, grit, marble, palladium, cement);
• can be used for descaling washes after laying or after building sites, for removing efflorescence, cement encrustations, paint;
• can also be used outdoors for periodic removal of limescale incrustations due to weathering;
• can be used for manual and mechanical washing (e.g. scrubber driers, pressure washers);
• does not contain hydrochloric acid;
• does not fumigate or develop toxic vapours.

SGRISER:

• removes old oil and/or wax impregnation treatments and heavy greasy deposits from stone materials, even delicate ones (e.g. polished marble, slate);
• is ideal for strong degreasing cleaning, also removing large accumulations of greasy dirt and biological incrustations (outdoor blackening);
• can facilitate the removal of ‘dark stains’ from sulphation on terracotta;
• leaves no harmful residues in the absorbent material;
• leaves no unpleasant odours during use and in the room.