Descaling cleaning for stones containing ferrous minerals
The following descaling cleaning system is the perfect solution for cleaning and descaling your floors and surfaces made of granite, quartzite, Luserna stone, porphyry, and stones containing ferrous materials. This descaling system is specifically formulated to remove stubborn lime, rust, and cement stains, while preventing the yellowing caused by ferrous minerals present in the stones.
Where and when
Where:
- On stones such as granite, porphyry, Luserna stone, beola, serizi, crystalline schist, quartzite and stones that tend to yellow because they contain ferrous material.
- Do not use on natural stone, cement agglomerates and materials not resistant to acids.
When:
- For an essential cleaning process of floor and wall coverings made of granite, porphyry and other stones containing ferrous minerals. Stones containing ferrous material, when washed with unsuitable acids such as hydrochloric acid, activate the iron contained within. This process causes the surfaces of this type of stone to yellow.
- This specific type of cleaning is ideal for removing:
-
- efflorescence and limescale incrustation;
- cement residues from laying;
- lime paint residues;
- plastering residues;
- surface rust deposits;
- lime deposits and incrustations due to irrigation or weathering.
-
Frequency of use:
- For a one time cleaning after installation;
- For cleaning after site work, painting or building work;
- For annual descaling cleaning in outdoor areas;
- For spot cleaning of ferrous contamination.
Performance and consumption
ACID HP4
- inhibits the oxidation of ferrous minerals contained in stone material, preventing the formation of halos and yellow stains;
- removes cement grout residues, efflorescence and lime incrustations;
- removes halos and light surface rust deposits from stone materials;
- does not contain hydrochloric acid.
Post-construction descaling cleaning
•Pure: on encrustations, calcareous deposits, and substantial residues of cement grout;
How to use the product:
•Spread the product on the surface and let it act for a few minutes;
•Avoid product dripping and stagnation;
•Rub the surface with brown buffer or brown discs or nylon , tynex or carbo-rundum brushes;
•Always rinse with plenty of water;
•Repeat the wash if necessary.
Yield:
•for vigorous washing 1 lt / 4-8 m²;
Prodotti e accessori
ACIDO HP4
Buffered acid cleaner specific for granite, schist, quartzite, gneiss, porphyry, and stones containing iron minerals. Removes cement grouts, efflorescence, limescale. Furthermore, it eliminates rust stains, inhibiting their formation.
BROWN BUFFER PAD MARBEC | Very Abrasive
Sponge with strong abrasive properties, for strong descaling and de-waxing of stone materials.
BROWN DISC MARBEC | Very Abrasive
The BROWN DISC is composed of a polyester structure with a high density of resin and mineral. It has high resistance to acid or alkaline substances, it is used wet to carry out manual dewaxing and descaling washes. Ideal for: Descaling cleaning on cotto and porcelain tiles; Dewaxing cleaning on cotto, stone and cement.
Specific descaling action
It can be used pure or diluted in water.
• Pure: on encrustations, limestone deposits and heavy cement grout residues;
• Diluted 1 part of ACIDO HP4 in one or more equal parts of water: for washing where a normal descaling action is required.
How to use the product:
• Spread the product on the surface and allow it to act for a few minutes;
• Avoid drips and product stagnation;
• Scrub the surface with brown pads or nylon, tynex or carbo-rundum brushes;
• Always rinse with plenty of water;
• Repeat washing if necessary.
Yield:
• for normal washing 1 lt / 10-15 mq.
Prodotti e accessori
ACIDO HP4
Buffered acid cleaner specific for granite, schist, quartzite, gneiss, porphyry, and stones containing iron minerals. Removes cement grouts, efflorescence, limescale. Furthermore, it eliminates rust stains, inhibiting their formation.
BROWN BUFFER PAD MARBEC | Very Abrasive
Sponge with strong abrasive properties, for strong descaling and de-waxing of stone materials.
BROWN DISC MARBEC | Very Abrasive
The BROWN DISC is composed of a polyester structure with a high density of resin and mineral. It has high resistance to acid or alkaline substances, it is used wet to carry out manual dewaxing and descaling washes. Ideal for: Descaling cleaning on cotto and porcelain tiles; Dewaxing cleaning on cotto, stone and cement.
THE TECHNICIAN'S ADVICE
Depending on your problem, check again the steps recommended by the technician and select the right products for you! For all your needs, do not hesitate to contact us, either by e-mail or on WhatsApp.
5.32€
BROWN BUFFER PAD MARBEC | Very Abrasive
Sponge with strong abrasive properties, for strong descaling and de-waxing of stone materials.
14.68€
BROWN DISC MARBEC | Very Abrasive
The BROWN DISC is composed of a polyester structure with a high density of resin and mineral. It has high resistance to acid or alkaline substances, it is used wet to carry out manual dewaxing and descaling washes. Ideal for: Descaling cleaning on cotto and porcelain tiles; Dewaxing cleaning on cotto, stone and cement.
