Descaling cleaning in post-laying and post-construction
This system is designed to carry out a proper post-laying and post-site cleaning of your ceramic tile flooring. Following this treatment it will be possible to remove all the building site residues, making the floor homogeneously clean and descaled.
Where and when
Where:
- On all types of ceramic flooring and covering.
When:
- For the descaling cleaning of ceramic tyles after installation.
- For the removal of cement encrustations.
- For the removal of consistent and tenacious lime deposits.
Frequency of use:
- For a one-off deep cleaning of floors and coverings in ceramic.
Performance and consumption
DELICACID:
- is a mild acid detergent with controlled action, ideal for cleaning even the most delicate stone materials (natural stone, grit, marble, palladium, cement);
- can be used for descaling washes after laying or after building sites, for removing efflorescence, cement encrustations, paint;
- can also be used outdoors for periodic removal of limescale incrustations due to weathering;
- can be used for manual and mechanical washing (e.g. scrubber driers, pressure washers);
- does not contain hydrochloric acid;
- does not fumigate or develop toxic vapours.
Do not use DELICACID on polished limestone (e.g. marble, travertine), on Italian slate (blackboard) and on polished agglomerates (e.g. grit, marble, cement).
Descaling after installation wash
• Dilute 1 part of DELICACID in 1 or 2 parts of water;
• spread the product on the surface and let it act a few minutes;
• rub the surface with pads or discs made of plastic fibers, such as BLUE BUFFER PAD and BLUE DISC, or nylon or tynex brushes;
• repeat washing if necessary;
• always rinse with plenty of water.
Yield:
• 1 lt /4-6 sqm
Prodotti e accessori
DELICACID
Specific buffered acid detergent to remove cement grouts, efflorescence and limestone incrustations on stones, ceramic materials and stone materials in general.
BLUE BUFFER PAD | Light Abrasion
Polyester fibre pad to use for the removal of surface layers of wax and delay the washing of resilient floors treated with metallic waxes. Removes scratches and signs.
BLUE DISC MARBEC | Light Abrasion
Disc for single-brush machine or washer-dryer, with light abrasive action for the extraordinary cleaning of stone and wood flooring.
NYLON DISC FOR SINGLE-BRUSH MACHINE | MARBEC
Suitable for single-brush machines and floor scrubbers.
ADVICE FROM THE TECHNICIAN
Depending on your problem, check again the steps recommended by the technician and select the right products for you! For all your needs, do not hesitate to contact us, either by e-mail or on WhatsApp.
5.32€
BLUE BUFFER PAD | Light Abrasion
Polyester fibre pad to use for the removal of surface layers of wax and delay the washing of resilient floors treated with metallic waxes. Removes scratches and signs.
16.71€
BLUE DISC MARBEC | Light Abrasion
Disc for single-brush machine or washer-dryer, with light abrasive action for the extraordinary cleaning of stone and wood flooring.
190.91€
NYLON DISC FOR SINGLE-BRUSH MACHINE | MARBEC
Suitable for single-brush machines and floor scrubbers.
252.65€
TYNEX DISC FOR FLOOR SCRUBBER | Extra strong
TYNEX DISC for FLOOR SCRUBBER is a disc made of strong plastic fibers. Ideal for washing rough and / or irregular stone surfaces such as handmade cotto.
2.68€
SOFT MICROFIBER CLOTH | MARBEC
Ideal for washable tops such as glass, mirrors, plastic, stainless steel, chrome, ceramic and enamel surfaces. Particularly strong, tear-resistant edge. Can be used for all environments. Measures 40x40 cm.
