Descaling cleaning

Where and when

Where:

• For floors and coverings such as cementitious agglomerates, cement tiles, graniglia tiles, Palladian tiles, and non-polished marble tiles, apply DELICACID.
• For polished agglomerates, use SGRISER.

When:

For cleaning and removing from surfaces:

• • • Efflorescence and lime deposits;
    • Cement residues from laying process;
    • Lime paint residues;
    • Plastering residues.
    • Limescale deposits caused by irrigation water.

When:

• A one-time cleaning after installation or construction work
• Periodic cleaning for descaling wash in outdoor cleaning

It is advisable to carry out a preliminary test on a small portion of the agglomerate floor to check the material’s resistance to the DELICACID product.

Frequency of use:

• For a one-off cleaning in case of post-laying and post construction dirt.

Performance and consumption

DELICACID:

• is a mild acid detergent with controlled action, ideal for cleaning even the most delicate stone materials (natural stone, grit, marble, palladium, cement);
• can be used for descaling washes after laying or after building sites, for removing efflorescence, cement encrustations, paint;
• can also be used outdoors for periodic removal of limescale incrustations due to weathering;
• can be used for manual and mechanical washing (e.g. scrubber driers, pressure washers);
• does not contain hydrochloric acid;
• does not fumigate or develop toxic vapours.

Do not use DELICACID on polished cementitious agglomerates.

SGRISER:

• Ideal for post-construction cleaning of polished cementitious agglomerates that are sensitive to acids;
• Alkaline pH cleaner, cleans and degreases cementitious agglomerates and, thanks to the mechanical action of the pad or disc, removes construction dirt, paint, coatings, and cement without damaging the surface;
• Does not leave harmful residues in absorbent materials;
• Does not leave unpleasant odors during use or in the environment.