Recovery of damaged shiny terrazzo

Our DIY Kits are the perfect solution for the renewal of marble and polished terrazzo such as grits, tiles, palladian, that have been damaged by acidic substances or that have become opaque due to the use or accumulation of limestone. These kits will allow you to restore the original brilliance of your surfaces (e.g. tables, kitchen tops, bathroom tops, small stains on floors), eliminating surface micro-scratches and returning them to the shiny look of yesteryear. With our high-quality products and detailed instructions included in the kit, you can get professional results right from home. Don’t let damage or opacity ruin the elegance of your surfaces, try our DIY Kits and renew your environment with ease!

Where and when

On tables, kitchen tops, bathroom tops, polished and compact terrazzo floors (e.g. glossy, palladian and terrazzo tiles).

Frequency of use:

When they have corrosion spots, wear-related opacifications, micro-scratches.

Performance and consumption

KIT RINNOVA MARMO:

  • is indicated for the re-polishing and removal of spots and slight opacifications due to wear, limestone crusts and acidic substances on stairs, walls and bathroom tops.
  • Use with a drill or screwdriver.
  • With the Kit Rinnova Marmo 75MM you can do up to about 3/4 m².
  • With the Kit Rinnova Marmo 125MM you can do up to about 8/10 m².
  • Always use water as lubricant together with PAD DIAM 75 or 125 MARBEC and KW-STAR.
  • Avoid using MARBEC DIAM PADS and KW-STAR without using water!
  • When not using an adjustable speed drill, adjust the pressure accordingly.
  • Use clean water at every step.
  • Repeat the process if necessary.
  • It is necessary to apply pressure on each step when working on marble or terrazzo.
  • Do not use on granite, quartz or resin tops.

KIT RECUPERA MARMO:

  • is indicated for the re-polishing and removal of stains due to wear, limestone crusts or acidic substances and scratches on stairs, walls and bathroom tops strongly damaged.
  • Use with a drill or screwdriver.
  • With the Kit Recupera Marmo 75MM you can do up to about 3/4 m².
  • With the Kit Recupera Marmo 125MM you can do up to about 8/10 m².
  • Always use water as lubricant together with MARBEC DIAM DISCMARBEC DIAM PAD and KW-STAR.
  • When not using an adjustable speed drill, adjust the pressure accordingly.
  • Use clean water at every step.
  • Repeat the process if necessary.
  • It is necessary to apply pressure on each step when working on marble or terrazzo.
  • Do not use on granite, quartz or resin tops.

The KIT RECUPERA MARMO MANUALE:

  • is suitable for re-polishing and removing of stains and opacifications due to wear, limestone crusts, acidic substances and micro-scratches on surfaces of limited dimensions (e.g. small tile).
  • Use with a drill or screwdriver.
  • With the Kit Recupera Marmo Manuale you can make limited-sized surfaces (e.g. small tile).
  • Avoid using MARBEC DIAM PAPER without using water!
  • Use clean water at every step.
  • Repeat the process if necessary.
  • It is necessary to apply pressure on each step when working on marble or terrazzo.
  • Do not use on granite, quartz or resin tops.
Torna all'intro
Step 1 di 3

KIT RECUPERA MARMO

1° Passage, RED DIAM DISC MARBEC: – Roughing – This is the most important step of all. If the first step is not performed well the following steps will not have an optimal result. The surface should be cleaned before starting (remove any previous film-forming treatments such as waxes or resins). Add water and slowly drill the RED DIAM DISC MARBEC. It is necessary to apply the product with the drill making small uniform circular movements on the affected surface until the water does not change color and a mush forms. Then remove the dirty water. You will need to repeat sanding depending on the state of the surface. 2° Passage, ORANGE DIAM DISC MARBEC: – Sanding – With this second step we will continue to smooth the surface more and more finely. Repeat the steps of the first application using the ORANGE DIAM DISC MARBEC. 3° Passage, YELLOW DIAM DISC MARBEC: – Pre-polishing (2 TIMES) – With this third step we will already get some shine. Add water and repeat the first application using the YELLOW DIAMOND DISC MARBEC. Clean the surface and let it dry. Repeat the process again and remove the dirty water. 4° Passage,BLUE DIAM DISC MARBEC: – Polishing (2 times) – Proceed to repeat step n. 3 using the BLUE DIAM DISC MARBEC. With this step we will get the shining. The color of the water will no longer be so cloudy. 5° Passage, GREEN DIAM DISC MARBEC: – Final polishing – Repeat step n.4 using the GREEN DIAMOND DISC MARBEC. The surface is polished. 6° Passage, GREEN PAD DIAM MARBEC + KW-STAR: – Crystallization – With this fourth step we will crystallize and polish the surface. Add small amounts of crystallizing powder of KW-STAR and slightly wet with water to form a paste, then slowly pass the GREEN DIAM PAD MARBEC with the drill. It is necessary to apply the product with the drill making small uniform circular movements on the affected surface until the water does not change color and a mush forms. Then remove the dirty water. You will need to repeat polishing depending on the state of the surface. 7° Passage, MICROFIBER CLOTH + MARMOLUX : – Protective action and maintenance – Add small amounts of MARMOLUX and use the MICROFIBER CLOTH to polish the surface. It is advisable to apply MARMOLUX for routine maintenance once every 6 months or as required.

Prodotti e accessori

KIT RECUPERO MARMO

KIT RECUPERA MARMO

This DIY- Kit is ideal for the recovery and re-polishing of marble and polished terrazzo (grits, palladian, etc.), which have been heavily damaged by acidic substances (corrosions), dulled by the use or accumulation of limestone or with scratches.

SOFT MICROFIBER CLOTH | MARBEC

Ideal for washable tops such as glass, mirrors, plastic, stainless steel, chrome, ceramic and enamel surfaces. Particularly strong, tear-resistant edge. Can be used for all environments. Measures 40x40 cm.

Torna all'intro
Step 2 di 3

KIT RECUPERA MARMO MANUALE

1° Passage, MARBEC RED DIAMOND PAPER: – Roughing – This is the most important step of all. If the first step is not performed well the following steps will not have an optimal result. The surface should be cleaned before starting (remove any previous film-forming treatments such as waxes or resins). Add water and slowly pass the MARBEC RED DIAMOND PAPER. Then remove the dirty water. You will need to repeat sanding depending on the state of the surface. 2° Passage, MARBEC ORANGE DIAMOND PAPER: – Sanding – With this second step we will continue to smooth the surface more and more finely. Repeat the phases of the first application using the MARBEC ORANGE DIAMOND PAPER. 3° Passage, MARBEC YELLOW DIAMOND PAPER: – Pre-polishing (2 TIMES) – With this third step we will already get some shine. Add water and repeat the first application using the MARBEC YELLOW DIAMOND PAPER. Clean the surface and let it dry. Repeat the process again and remove the dirty water. 4° Passage, MARBEC BLUE DIAMOND PAPER: – Polishing (2 times) – Proceed to repeat step n. 3 using the MARBEC BLUE DIAMOND PAPER. With this step we will get shine. The color of the water will no longer be so cloudy. 5° Passage, MARBEC GREEN DIAMOND SPONGE: – Final polishing – Repeat step n.4 using the MARBEC GREEN DIAMOND SPONGE. The surface is polished. 6° Passage, MICROFIBER CLOTH + MARMOLUX: – Protective action and maintenance – Add small amounts of MARMOLUX and use the MICROFIBER CLOTH to polish the surface. It is advisable to apply MARMOLUX for routine maintenance once every 6 months or as required.

Prodotti e accessori

KIT MANUAL MARBLE RECOVERY

KIT RECUPERA MARMO MANUALE

This DIY Kit is ideal for the renewal of small surfaces (e.g. small tile) in marble and polished terrazzo (grits, palladian, etc.), which have been damaged by acidic substances (corrosion) or made opaque by the use or accumulation of limestone or having micro-scratches.

SOFT MICROFIBER CLOTH | MARBEC

Ideal for washable tops such as glass, mirrors, plastic, stainless steel, chrome, ceramic and enamel surfaces. Particularly strong, tear-resistant edge. Can be used for all environments. Measures 40x40 cm.

Torna all'intro
Step 3 di 3

KIT RINNOVA MARMO

1° Passage, RED DIAM PAD MARBEC: – First sanding- This is the most important step of all. If the first step is not performed well the following steps will not have an optimal result. The surface should be cleaned before starting (remove any previous film-forming treatments such as waxes or resins). Add water and slowly drill through the RED DIAM PAD MARBEC. It is necessary to apply the product with the drill making small uniform circular movements on the affected surface until the water does not change color and a slurry forms. Then remove the dirty water. You will need to repeat sanding depending on the state of the surface. 2° Passage, YELLOW DIAM PAD MARBEC: – Second sanding – With this second step we will continue to smooth the surface more and more finely. Repeat the first application using the YELLOW DIAM PAD MARBEC. 3° Passage, GREEN PAD DIAM MARBEC: – Third sanding – With this third step we will continue to smooth the surface more and more finely. Repeat the first application using the GREEN PAD DIAM MARBEC. Do not apply so much pressure on this step. 4° Passage, GREEN DIAM PAD MARBEC + KW-STAR: – Crystallization – With this fourth step we will crystallize and polish the surface. Add small amounts of crystallizing powder of KW-STAR and slightly wet with water to form a paste, then slowly pass the GREEN DIAM PAD MARBEC with the drill. It is necessary to apply the product with the drill making small uniform circular movements on the affected surface until the water does not change color and a slurry forms. Then remove the dirty water. You will need to repeat polishing depending on the state of the surface. 5° Passage, MICROFIBER CLOTH + MARMOLUX: – Protective action and maintenance – Add small amounts of MARMOLUX and use the MICROFIBER CLOTH to polish the surface. It is advisable to apply MARMOLUX for routine maintenance once every 6 months or as required.

Prodotti e accessori

KIT RINNOVA MARMO

This DIY Kit is ideal for the renewal of marble and polished terrazzo (grits, palladian, etc.), which have been slightly damaged by acidic substances (corrosions) or dulled by the use or accumulation of limestone or which have superficial micro-scratches.

SOFT MICROFIBER CLOTH | MARBEC

Ideal for washable tops such as glass, mirrors, plastic, stainless steel, chrome, ceramic and enamel surfaces. Particularly strong, tear-resistant edge. Can be used for all environments. Measures 40x40 cm.

THE ADVICE OF THE TECHNICIAN

Based on your problem, double-check the steps recommended by the technician and select the right products for you!

KIT RECUPERO MARMO

93.64€

KIT RECUPERA MARMO

This DIY- Kit is ideal for the recovery and re-polishing of marble and polished terrazzo (grits, palladian, etc.), which have been heavily damaged by acidic substances (corrosions), dulled by the use or accumulation of limestone or with scratches.

KIT MANUAL MARBLE RECOVERY

86.38€

KIT RECUPERA MARMO MANUALE

This DIY Kit is ideal for the renewal of small surfaces (e.g. small tile) in marble and polished terrazzo (grits, palladian, etc.), which have been damaged by acidic substances (corrosion) or made opaque by the use or accumulation of limestone or having micro-scratches.

66.95€

KIT RINNOVA MARMO

This DIY Kit is ideal for the renewal of marble and polished terrazzo (grits, palladian, etc.), which have been slightly damaged by acidic substances (corrosions) or dulled by the use or accumulation of limestone or which have superficial micro-scratches.

2.68€

SOFT MICROFIBER CLOTH | MARBEC

Ideal for washable tops such as glass, mirrors, plastic, stainless steel, chrome, ceramic and enamel surfaces. Particularly strong, tear-resistant edge. Can be used for all environments. Measures 40x40 cm.

Free shipping from 100€ - Delivery in 5-6 working days
Secure payment
Whatsapp Contact: +39 334 8578502